6 Technical data
Installation and operating manual
33
Daikin Altherma EHS(X/H)(B)-D
Daikin Altherma 3 R ECH₂O
008.1451099_00 – 07/2020
5.7 Handover to the operating
company
Once the test run is finished and the unit operates properly, please
make sure the following is clear for the user:
▪ Fill in the installer setting table (in the operation manual) with the
actual settings.
▪ Make sure that the user has the printed documentation and ask
him/her to keep it for future reference. Inform the user that he can
find the complete documentation on the url as earlier described in
this manual.
▪ Explain the user how to properly operate the system and what he/
she has to do in case of problems.
▪ Show the user what he/she has to do in relation to maintaining the
unit.
▪ Explain the user about energy saving tips as described in the
operation manual.
6 Technical data
Part of the current technical data is available on the regional Daikin-
website (publicly accessible). The complete technical data is
available via the Daikin Business Portal (authentication required).
6.1 Information on the type plate
6‒1 Type plate
a Device type
b Empty weight
c Total filled weight
d Max. permissible operating pressure PMS (heating)
e Total storage capacity
f Max. permissible operating temperature T
max
g Standby heat loss in 24hours at 60°C (storage tank) Q
st
h Operating pressure of storage water pH
2
O
i Nominal capacity of drinking water
j Max. operating pressure PMW (plumbing)
k Nominal voltage U
l Protection type
m Electrical power input elmax
n Backup heater (optional)
o Backup heater protection class (optional)
p Backup heater fuse (optional)
q Output/backup heater power supply (optional)
To select; 0kW: no/external heat source
r Refrigerant circuit
s Max. operating pressure (refrigerant circuit)
t Total refrigerant charge (for information, see installation
instructions for the outdoor heat pump unit)
u Attention: Flammable refrigerant
v Further information on the refrigerant: See instructions
w Serial number (specify in the event of complaints or
inquiries)
x Date of production
6.2 Characteristic lines
6.2.1 Sensor characteristic lines
6‒1 Temperature sensor
Measured temperature in °C
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Sensor resistance in kOhm according to standard or manufacturer's indications
t
DHW1
, t
V,BH
NTC 98.66 56.25 33.21 20.24 12.71 8.20 5.42 3.66 2.53 1.78 1.28 0.93 0.69 0.52 0.36
t
R
, t
V
, t
DHW2
, t
DC
NTC - - 65.61 39.9 25 16.09 10.62 7.176 4.96 3.497 2.512 1.838 1.369 - -