Field Wiring SiE33-102
154 Installation Manual
7.3 Optional Parts Cool/Heat Selector
SS1 ..... Selector switch (fan, cool/heat)
SS2 ..... Selector switch (cool/heat)
Notes: Use copper conductors only.
When using the adaptor for sequential start, refer to chapter “Examples”.
For connection wiring to outdoor-outdoor transmission F1-F2, outdoor-indoor transmission F1-F2, refer
to chapter “Examples”.
For connection wiring to the central remote control, refer to the installation manual of the central remote
control.
Use insulated wire for the power cord.
Si33-102.book Page 154 Tuesday, June 26, 2001 3:18 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
