Danfoss Vacon NXP Series - Page 99

Code Function Min Max Unit Default Cust Description
S6.5.4 Multimonitoring items Change Enabled
Change Disabled
S6.6 Keypad settings
P6.6.1 Default page
P6.6.2 Default page/ Operating
menu
P6.6.3 Timeout time 0 65535 s 30
P6.6.4 Contrast 0 31 18
P6.6.5 Backlight time Always 65535 min 10
S6.7 Hardware settings
P6.7.1 Internal brake resistor Connected Not connected
Connected
P6.7.2 Fan control Continuous Continuous
Temperature
First start
Calc temp
P6.7.3 HMI acknowledg. timeout 200 5000 ms 200
P6.7.4 HMI number of retries 1 10 5
P6.7.5 Sine filter Connected Not connected
Connected
S6.8 System information
S6.8.1 Total counters
C6.8.1.1 MWh counter kWh
C6.8.1.2 Power On day counter
C6.8.1.3 Power On hours counter hh:mm: ss
S6.8.2 Trip counters
T6.8.2.1 MWh counter kWh
T6.8.2.2 Clear MWh trip counter
T6.8.2.3 Operating days trip counter
T6.8.2.4 Operating hours trip counter hh:mm: ss
T6.8.2.5 Clear operating time counter
S6.8.3 Software info
S6.8.3.1 Software package
S6.8.3.2 System software version
Using the Control Panel
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 99
Danfoss A/S © 2018.06