Danfoss VLT AutomationDrive FC 302 Programming Guide

Option
Name
Description
[79]
Logic rule 9
[80]
SL digital out A
[81]
SL digital out B
[82]
SL digital out C
[83]
SL digital out D
[84]
SL digital out E
[85]
SL digital out F
[86]
ATEX ETR cur. alarm
[87]
ATEX ETR freq. alarm
[88]
ATEX ETR cur. warning
[89]
ATEX ETR freq. warning
[90]
Safe function active
[91]
Safe opt. reset. req.
[92]
IGBT-cooling
[96]
Reverse after ramp
N O T I C E
This option is available only with software version 48.XX.
Indicates if the direction of rotation should be reversed. Depends on whether the speed
reference is positive or negative after the ramp specified in parameter 16-48 Speed Ref.
After Ramp [RPM].
[181]
Prev. maintenance
[196]
Emcy mode is active
The drive is operating in emergency mode. See parameter group 24-0* Emergency Mode.
[197]
Emcy mode was active
The drive has been operating in emergency mode.
[198]
Emcy mode limits
During emergency mode operation, 1 of the critical alarms has been activated and sup-
pressed by emergency mode. This may lead to reduced drive performance and expec-
ted operation lifetime before service is required.
[200]
User defined alerts
[210]
Pos. set acknowledge
N O T I C E
This parameter is only available with software version 48.9X.
Acknowledge activation of the set target position.
[231]
In power lim. mot.
N O T I C E
This option is only available in FC 302.
See parameter group 4-8* Power Limit. Use this option in motor mode only.
AU275636650261en-000101 / 130R0334278 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English