Danfoss VLT AutomationDrive FC 302 Programming Guide

Parameter 0-45 [Drive Bypass] Key on LCP
Table 33: Parameter 0-45 [Drive Bypass] Key on LCP
0-45 [Drive Bypass] Key on LCP
Default value: [1] Enabled
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Press [Off] and select [0] Disabled to avoid unintended stop of the drive. Press [Off] and select [2] Password to avoid unauthorized
bypass of the drive. If parameter 0-45 [Drive Bypass] Key on LCP is included in the Quick Menu, define the password in parameter 0-65
Personal Menu Password.
Option
Name
Description
[0]
Disabled
Disables the key.
[1]*
Enabled
[2]
Password
5.1.6 0-5* Copy/Save
Copy parameters from and to the LCP. Use these parameters for saving and copying setups from 1 drive to another.
Parameter 0-50 LCP Copy
Table 34: Parameter 0-50 LCP Copy
0-50 LCP Copy
Default value: [0] No copy
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: False
N O T I C E
This parameter cannot be adjusted while the motor is running.
Option
Name
Description
[0]*
No copy
[1]
All to LCP
Copies all parameters in all setups from the drive memory to the LCP memory.
[2]
All from LCP
Copies all parameters in all setups from the LCP memory to the drive memory.
[3]
Size indep. from LCP
Copy only the parameters that are independent of the motor size. This selection can be used
to program several drives with the same function without disturbing motor data.
[4]
File from MCO to LCP
[5]
File from LCP to MCO
[6]
Data from DYN to LCP
[7]
Data from LCP to DYN
[9]
Safety Par. from LCP
[10]
Delete LCP copy data
Use to delete the copy after the transfer is complete.
AU275636650261en-000101 / 130R033456 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English