Danfoss VLT AutomationDrive FC 302 Programming Guide

View the type code string for the option installed in slot C and a translation of the type code string. For example, for type code string
CXXXX, the translation is No option.
Parameter 15-75 Slot C0/E0 Option SW Version
Table 810: Parameter 15-75 Slot C0/E0 Option SW Version
15-75 Slot C0/E0 Option SW Version
Default value: 0
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[20]
Change during operation: False
View the software version for the option installed in slot C.
Parameter 15-76 Option in Slot C1/E1
Table 811: Parameter 15-76 Option in Slot C1/E1
15-76 Option in Slot C1/E1
Default value: 0
Parameter type: Range, 0 - 30
Setup: All setups
Conversion index: 0
Data type: VisStr[30]
Change during operation: False
View the type code string for the option installed in slot C1 and a translation of the type code string. For example, for type code
string CXXXX, the translation is No option.
Parameter 15-77 Slot C1/E1 Option SW Version
Table 812: Parameter 15-77 Slot C1/E1 Option SW Version
15-77 Slot C1/E1 Option SW Version
Default value: 0
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[20]
Change during operation: False
Shows the software version for the installed option in option slot C.
5.15.12 15-8* Operating Data II
Parameter 15-80 Fan Running Hours
Table 813: Parameter 15-80 Fan Running Hours
15-80 Fan Running Hours
Default value: 0 h
Parameter type: Range, 0 - 2147483647 h
Setup: All setups
Conversion index: 74
Data type: Uint32
Change during operation: True
View for how many hours the heat sink fan has run (increments for every hour). The value is saved when the drive is turned off.
Parameter 15-81 Preset Fan Running Hours
Table 814: Parameter 15-81 Preset Fan Running Hours
15-81 Preset Fan Running Hours
Default value: 0 h
Parameter type: Range, 0 - 99999 h
Setup: All setups
Conversion index: 74
Data type: Uint32
Change during operation: True
Enter the preset fan running hours counter, see parameter 15-80 Fan Running Hours. This parameter cannot be selected via the serial
port RS485.
AU275636650261en-000101 / 130R0334494 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English