Danfoss VLT AutomationDrive FC 302 Programming Guide

•
•
•
•
Parameter 43-14 PC Fan B Speed
Table 1417: Parameter 43-14 PC Fan B Speed
43-14 PC Fan B Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [8]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the measured speed of fan B on the power card. Each power card has up to 3 fan connections. Place the fan in the drive
according to the Operating Guide. A typical placement for fan B is on the enclosure door (the internal fan). The value of this parame-
ter is:
The actual fan speed when there is a DC fan in the drive.
Relative speed when there is an AC fan in the drive.
Parameter 43-15 PC Fan C Speed
Table 1418: Parameter 43-15 PC Fan C Speed
43-15 PC Fan C Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [8]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the measured speed of fan C on the power card. Each power card has up to 3 fan connections. Place the fan in the drive
according to the Operating Guide. A typical placement for fan C is inside the enclosure (the mixing fan). The value of this parameter
is:
The actual fan speed when there is a DC fan in the drive.
Relative speed when there is an AC fan in the drive.
5.32.3 43-2* Fan Pow.Card Status
N O T I C E
This parameter group is only available in FC 302.
Parameter 43-20 FPC Fan A Speed
Table 1419: Parameter 43-20 FPC Fan A Speed
43-20 FPC Fan A Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [2]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the speed of the power card fan A.
Parameter 43-21 FPC Fan B Speed
Table 1420: Parameter 43-21 FPC Fan B Speed
43-21 FPC Fan B Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [2]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the speed of the power card fan B.
AU275636650261en-000101 / 130R0334680 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English