Danfoss VLT AutomationDrive FC 302

Shows the value sent in PCD5 of the fieldbus telegram.
Parameter 34-26 PCD 6 Read from MCO
Table 1254: Parameter 34-26 PCD 6 Read from MCO
34-26 PCD 6 Read from MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value sent in PCD6 of the fieldbus telegram.
Parameter 34-27 PCD 7 Read from MCO
Table 1255: Parameter 34-27 PCD 7 Read from MCO
34-27 PCD 7 Read from MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value sent in PCD7 of the fieldbus telegram.
Parameter 34-28 PCD 8 Read from MCO
Table 1256: Parameter 34-28 PCD 8 Read from MCO
34-28 PCD 8 Read from MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value sent in PCD8 of the fieldbus telegram.
Parameter 34-29 PCD 9 Read from MCO
Table 1257: Parameter 34-29 PCD 9 Read from MCO
34-29 PCD 9 Read from MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value sent in PCD9 of the fieldbus telegram.
Parameter 34-30 PCD 10 Read from MCO
Table 1258: Parameter 34-30 PCD 10 Read from MCO
34-30 PCD 10 Read from MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value sent in PCD10 of the fieldbus telegram.
5.27.3 34-4* Inputs & Outputs
Parameter 34-40 Digital Inputs
Table 1259: Parameter 34-40 Digital Inputs
34-40 Digital Inputs
Default value: 0
Parameter type: Range, 0 - 4095
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
AU275636650261en-000101 / 130R0334 | 627Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide