Danfoss VLT AutomationDrive FC 302

Option
Name
Description
[78]
Tracking error warning
[89]
Mech brake sliding warning
[10002]
Live zero error alarm
[10003]
No motor alarm
[10004]
Mains phase loss alarm
[10007]
DC overvoltage alarm
[10008]
DC undervoltage alarm
[10009]
Inverter overload alarm
[10010]
ETR overtemperature alarm
[10011]
Thermistor overtemp alarm
[10012]
Torque limit alarm
[10013]
Overcurrent alarm
[10014]
Earth fault alarm
[10016]
Short circuit alarm
[10017]
CTW timeout alarm
[10022]
Hoist brake alarm
[10026]
Brake powerlimit alarm
[10027]
Brakechopper shortcircuit alarm
[10028]
Brake check alarm
[10029]
Heatsink temp alarm
[10030]
Phase U missing alarm
[10031]
Phase V missing alarm
[10032]
Phase W missing alarm
[10033]
Inrush fault alarm
[10034]
Fieldbus com fault alarm
[10036]
Mains failure alarm
[10037]
Phase imbalance alarm
[10038]
Internal fault
[10039]
Heatsink sensor alarm
[10045]
Earth fault 2 alarm
[10046]
Powercard supply alarm
[10047]
24V supply alarm
AU275636650261en-000101 / 130R0334 | 285Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide