Danfoss VLT AutomationDrive FC 302 Programming Guide

Option
Name
Description
[223]
On target
[224]
Position error
[225]
Position limit
[226]
Touch on target
[227]
Touch activated
[228]
Comparator 6
[229]
Comparator 7
[230]
Comarator 8
[231]
Comparator 9
[232]
Logic rule 6
[233]
Logic rule 7
[234]
Logic rule 8
[235]
Logic rule 9
[236]
SL time-out 8
[237]
SL time-out 9
[238]
RS flipflop 8
[239]
RS flipflop 9
[240]
SL digital output A
[241]
SL digital output B
[242]
SL digital output C
[243]
SL digital output D
[244]
SL digital output E
[245]
SL digital output F
Parameter 13-03 Reset SLC
Table 673: Parameter 13-03 Reset SLC
13-03 Reset SLC
Default value: [0] D0 not reset SLC
Parameter type: Option
Setup: All setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]*
Do not reset SLC
Retain programmed settings in parameter group 13-** Smart Logic
[1]
Reset SLC
Reset all parameters in parameter group 13-** Smart Logic
AU275636650261en-000101 / 130R0334380 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English