Danfoss VLT AutomationDrive FC 302

Array with 20 elements shown below the parameter number in the display. Press [OK] and step between elements with [◃], [▹], [▵],
and [▿]. Select the item to be associated with the preventive maintenance event.
Option
Name
Description
[1]*
Motor bearings
[11]
Drive cooling fan
[12]
System health check
[13]
Warranty
[14]
Mech brake
[20]
Maintenance text 0
[21]
Maintenance text 1
[22]
Maintenance text 2
[23]
Maintenance text 3
[24]
Maintenance text 4
[25]
Maintenance text 5
[26]
Service log full
Parameter 23-11 Maintenance Action
Table 1029: Parameter 23-11 Maintenance Action
23-11 Maintenance Action
Default value: [1] Lubricate
Parameter type: Option, Array [6]
Setup: 1 setup
Conversion index: -
Data type: Uint8
Change during operation: True
Select the action to be associated with the preventive maintenance event.
Option
Name
Description
[1]*
Lubricate
[2]
Clean
[3]
Replace
[4]
Inspect/check
[5]
Overhaul
[6]
Renew
[7]
Check
[20]
Maintenance text 0
[21]
Maintenance text 1
[22]
Maintenance text 2
[23]
Maintenance text 3
AU275636650261en-000101 / 130R0334 | 559Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide