Danfoss VLT AutomationDrive FC 302

Shows the value received in PCD3 of the fieldbus telegram.
Parameter 34-04 PCD 4 Write to MCO
Table 1242: Parameter 34-04 PCD 4 Write to MCO
34-04 PCD 4 Write to MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value received in PCD4 of the fieldbus telegram.
Parameter 34-05 PCD 5 Write to MCO
Table 1243: Parameter 34-05 PCD 5 Write to MCO
34-05 PCD 5 Write to MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value received in PCD5 of the fieldbus telegram.
Parameter 34-06 PCD 6 Write to MCO
Table 1244: Parameter 34-06 PCD 6 Write to MCO
34-06 PCD 6 Write to MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value received in PCD6 of the fieldbus telegram.
Parameter 34-07 PCD 7 Write to MCO
Table 1245: Parameter 34-07 PCD 7 Write to MCO
34-07 PCD 7 Write to MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value received in PCD7 of the fieldbus telegram.
Parameter 34-08 PCD 8 Write to MCO
Table 1246: Parameter 34-08 PCD 8 Write to MCO
34-08 PCD 8 Write to MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value received in PCD8 of the fieldbus telegram.
Parameter 34-09 PCD 9 Write to MCO
Table 1247: Parameter 34-09 PCD 9 Write to MCO
34-09 PCD 9 Write to MCO
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Shows the value received in PCD9 of the fieldbus telegram.
AU275636650261en-000101 / 130R0334 | 625Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide