Danfoss VLT AutomationDrive FC 302

Option
Name
Description
[28]
Brake, no brake war
[29]
Brake ready, no fault
[30]
Brake fault (IGBT)
[31]
Relay 123
[32]
Mech brake ctrl
[33]
Safe stop active
[35]
External interlock
[38]
Motor feedback error
[39]
Tracking error
[40]
Out of ref range
[41]
Below reference, low
[42]
Above ref, high
[43]
Extended PID Limit
[45]
Bus ctrl.
[46]
Bus ctrl, 1 if timeout
[47]
Bus ctrl, 0 if timeout
[50]
On reference
[51]
MCO controlled
[59]
Remote, enable, no TW
[60]
Comparator 0
[61]
Comparator 1
[62]
Comparator 2
[63]
Comparator 3
[64]
Comparator 4
[65]
Comparator 5
[66]
Comparator 6
[67]
Comparator 7
[68]
Comparator 8
[69]
Comparator 9
[70]
Logic rule 0
[71]
Logic rule 1
[72]
Logic rule 2
AU275636650261en-000101 / 130R0334658 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide