Danfoss VLT AutomationDrive FC 302

Option
Name
Description
[190]
Safe Function active
[191]
Safe Opt. Reset req.
[192]
RS Flipflop 0
[193]
RS Flipflop 1
[194]
RS Flipflop 2
[195]
RS Flipflop 3
[196]
RS Flipflop 4
[197]
RS Flipflop 5
[198]
RS Flipflop 6
[199]
RS Flipflop 7
[221]
IGBT-cooling
[222]
Homing OK
[223]
On target
[224]
Position limit
[225]
Position error
[226]
Touch on target
[227]
Touch activated
[231]
In power lim. mot.
[232]
In power lim. gen.
[233]
In power limit
[234]
PE power off
[246]
Emcy mode was act.
[247]
Emergency mode
[249]
Emcy m. OPR unexpected
[250]
Emcy mode limits
[254]
Testing emcy mode
Parameter 36-62 Terminal X49/11 Min. Scale
Table 1344: Parameter 36-62 Terminal X49/11 Min. Scale
36-62 Terminal X49/11 Min. Scale
Default value: 0%
Parameter type: Range, 0 - 200%
Setup: All setups
Conversion index: 0
Data type: Int16
Change during operation: True
AU275636650261en-000101 / 130R0334660 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide