Danfoss VLT AutomationDrive Design Guide

7.1.6 Mechanical Dimensions, 12-Pulse Units
F8 IP21/54 - NEMA 1/12 F9 IP21/54 - NEMA 1/12
130BB754.10
800
607
IP/21 NEMA 1
IP/54
NEMA 12
1400 m3/Hr 824 CFM
618
CFM
1050
m3/Hr
1160 CFM 1970 m3/Hr
2280
2205
1497
130BB568.10
1400
607
IP/21 NEMA 1
IP/54
NEMA 12
2100 m3/Hr 1236 CFM
927
CFM
1575
m3/Hr
1160 CFM 1970 m3/Hr
2280
2205
1497
All dimensions in mm
Mechanical Installation - ... FC 300 Design Guide
130 MG.33.BD.02 - VLT
®
is a registered Danfoss trademark
77

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)