Danfoss VLT AutomationDrive Design Guide

Terminal locations - Options Cabinet Frame Size F11/F13
316.4 179.2 135.2
80.4 36.4
.0
244.4
.0
151.3
440.4
547.8
.0
73.0 88.1
112.0 138.9 172.0 180.7 232.0 231.5 273.3 324.1 338.9 387.8 437.0 438.6 480.4 497.0 531.2 557.0 573.0 602.3 625.8
130BB757.10
Illustration 7.38 Terminal locations - Options Cabinet (Left side, front and right side view).
Mechanical Installation - ... FC 300 Design Guide
150 MG.33.BD.02 - VLT
®
is a registered Danfoss trademark
77

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)