Danfoss VLT AutomationDrive Design Guide

Frame size D1 D2 D3 D4
130BA816.10
130BA817.10
130BA819.10
130BA820.10
Enclosure
protection
IP 21/54 21/54 00 00
NEMA Type 1/ Type 12 Type 1/ Type 12 Chassis Chassis
High overload rated
power - 160%
overload torque
90-110kW at 400V
(380-/ 500V)
37-132kW at 690V
(525-690V)
132-200kW at 400V
(380-/ 500V)
160-315kW at 690V
(525-690V)
90-110kW at 400V
(380-/500V)
37-132kW at 690V
(525-690V)
132-200kW at 400V
(380-/ 500V)
160-315kW at 690V
(525-690V)
Frame size E1 E2 F1/F3 F2/ F4
130BA818.10
130BA821.10
F3
F1
130BA959.10
F4
F3
130BB092.10
Enclosure
protection
IP 21/54 00 21/54 21/54
NEMA Type 1/ Type 12 Chassis Type 1/ Type 12 Type 1/ Type 12
High overload rated
power - 160%
overload torque
250-400kW at 400V
(380-/500V)
355-560kW at 690V
(525-690V)
250-400kW at 400V
(380-/500V)
355-560kW at 690V
(525-690V)
450 - 630kW at 400V
(380 - /500V)
630 - 800kW at 690V
(525-690V)
710 - 800kW at 400V
(380 - / 500V)
900 - 1000kW at 690V
(525-690V)
NOTE
The F frames are available with or without options cabinet. The F1 and F2 consist of an inverter cabinet on the right and
rectifier cabinet on the left. The F3 and F4 have an additional options cabinet left of the rectifier cabinet. The F3 is an F1
with an additional options cabinet. The F4 is an F2 with an additional options cabinet.
12-Pulse Units
Frame size F8 F9 F10 F11 F12 F13
IP
NEMA
21, 54
Type 1/Type 12
21, 54
Type 1/Type 12
21, 54
Type 1/Type 12
21, 54
Type 1/Type 12
21, 54
Type 1/Type 12
21, 54
Type 1/Type 12
F9
F8
130BB690.10
F11
F10
130BB691.10
F13
F12
130BB692.10
High overload rated
power - 160% overload
torque
250 - 400kW
(380 - 500V)
355 - 560kW
(525-690V)
250 - 400kW
(380 - 500V)
355 - 56kW
(525-690V)
450 - 630kW
(380 - 500V)
630 - 800kW
(525-690V)
450 - 630kW
(380 - 500V)
630 - 800kW
(525-690V)
710 - 800kW
(380 - 500V)
900 - 1200kW
(525-690V)
710 - 800kW
(380 - 500V)
900 - 1200kW
(525-690V)
NOTE
The F frames are available with or without options cabinet. The F8, F10 and F12 consist of an inverter cabinet on the right
and rectifier cabinet on the left. The F9, F11 and F13 have an additional options cabinet left of the rectifier cabinet. The F9
is an F8 with an additional options cabinet. The F11 is an F10 with an additional options cabinet. The F13 is an F12 with an
additional options cabinet.
Introduction to FC 300 FC 300 Design Guide
16 MG.33.BD.02 - VLT
®
is a registered Danfoss trademark
3
3

Danfoss VLT AutomationDrive Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive
Category	DC Drives
Language	English