Danfoss VLT AutomationDrive Design Guide

3.9.1 Mechanical Brake Control 45
3.9.2 Hoist Mechanical Brake 46
3.9.3 Brake Resistor Cabling 47
3.10 Smart Logic Controller
47
3.11 Extreme Running Conditions
49
3.11.1 Motor Thermal Protection 49
3.12 Safe Stop of FC 300
51
3.12.2 Installation of External Safety Device in Combination with MCB 112 56
3.12.3 Safe Stop Commissioning Test 57
3.13 Certificates
58
4 FC 300 Selection
60
4.1 Electrical Data - 200-240V
60
4.2 Electrical Data - 380-500V
63
4.3 Electrical Data - 525-600V
71
4.4 Electrical Data - 525-690V
74
4.5 General Specifications
85
4.7.1 Acoustic Noise 90
4.8.1 du/dt Conditions 91
4.9 Special Conditions
94
4.9.1 Manual Derating 94
4.6.1.1 Derating for Running at Low Speed 94
4.9.2 Automatic Derating 94
5 How to Order
95
5.1.1 Ordering from Type Code 95
5.1.2 Drive Configurator 95
5.2.1 Ordering Numbers: Options and Accessories 99
5.2.2 Ordering Numbers: Spare Parts 100
5.2.3 Ordering Numbers: Accessory Bags 100
5.2.4 Ordering Numbers: High Power Kits 101
5.2.5 Ordering Numbers: Brake Resistors 10% 101
5.2.6 Ordering Numbers: Brake Resistors 40% 106
5.2.7 Flat Packs 111
5.2.8 Ordering Numbers: Harmonic Filters 113
5.2.9 Ordering Numbers: Sine Wave Filter Modules, 200-500 VAC 115
5.2.10 Ordering Numbers: Sine-Wave Filter Modules, 525-690 VAC 116
5.2.11 Ordering Numbers: du/dt Filters, 380-480/500V AC 116
5.2.12 Ordering Numbers: du/dt Filters, 525-690V AC 116
6 Mechanical Installation - Frame Size A, B and C
117
Contents FC 300 Design Guide
2 MG.33.BD.02 - VLT
®
is a registered Danfoss trademark

Danfoss VLT AutomationDrive Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive
Category	DC Drives
Language	English