Datalogic DS8100A

DS8100A REFERENCE MANUAL
92
9
1. Select the “SPY” option from the Tools menu or click on the related icon on the Genius™
toolbar to open the following dialog box:
NOTE
When selecting a slave scanner through the Master, click on the slave in
the Devices window, then click the SPY icon.
Figure 98 – Opening the Spy Window
2. Once the Spy window has been opened, select the “PackTrack™ Calibration” option from
the Tools menu:
Figure 99 – Selecting PackTrack™ Calibration Option
SPY ICON