6-132 Magellan
®
8100/8100Ω and 8200/8200Ω Scanner
EAN-13 ISBN Conversion Enable
Enables/disables conversion of EAN/JAN-13 labels starting with 978 to
Bookland ISBN labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-13 ISBN Conversion= DISABLE
EAN-13 ISBN Conversion = ENABLE
NOTE
If any add-on information is present on the label prior to the conversion to
ISBN, the add-on data will be discarded. Only the base label will be con-
verted.
To Next Page
Loading...
Need help?
General
