Datalogic MAGELLAN 8100 User Manual

Product Reference Guide 6-139
EAN-8 Enable
Enables/disables the ability of the scanner to decode EAN/JAN-8 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-8 = DISABLE
EAN-8 = ENABLE

Datalogic MAGELLAN 8100 Specifications

General

Brand	Datalogic
Model	MAGELLAN 8100
Category	Barcode Reader
Language	English