6-208 Magellan
®
8100/8100Ω and 8200/8200Ω Scanner
Code 128 Stitching
Enables/disables stitching for Code 128 labels. When parts of a Code 128
bar code are presented to the scanner with this feature enabled, the bar
code parts will be assembled by the scanner’s software, and the data will be
decoded if all bar code proofing requirements are met.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
CODE 128 STITCHING = DISABLE
CODE 128 STITCHING = ENABLE
To Next Page
Loading...
Need help?
General
