6-176 Magellan
®
8100/8100Ω and 8200/8200Ω Scanner
RSS Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for
RSS Expanded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RSS EXPANDED LENGTH CONTROL = VARIABLE-LENGTH
RSS EXPANDED LENGTH CONTROL = FIXED-LENGTH
NOTE
If variable-length control was selected, you must now set the features
RSS Expanded Maximum Label Length and RSS Expanded
Minimum Label Length. If fixed-length control was selected, you
must now set RSS Expanded Fixed Length 1 and RSS
Expanded Fixed Length 2.
To Next Page
Loading...
Need help?
General
