F-4 Magellan
®
8100/8100Ω and 8200/8200Ω Scanner
UPC-E with 2-Digit Supplemental
• Number system must be included in label data.
• Check digit must be included in label data and is assumed to be
correct.
• Supplemental data is appended to base label.
• Prefix must be an ASCII character 'E' - total length including pre-
fix must be 11.
• Example: 'E0998875012'.
UPC-E with 5-Digit Supplemental
• Number system must be included in label data.
• Check digit must be included in label data and is assumed to be
correct.
• Prefix must be an ASCII character 'E' - total length including pre-
fix must be 14.
• Example: 'E0998875012345'.
UPC-E with Code 128 Supplemental
• Number system must be included in label data.
• Check digit must be included in label data and is assumed to be
correct.
• Supplemental data is appended to base label.
• Prefix must be an ASCII character 'E' - total length including pre-
fix must be greater or equal to 15 (code 128 Supplemental codes
are variable length having a minimum of 2 data characters).
• Characters immediately following base label must be of the form
'8100', '8101' or '8102'.
• Example: 'E099887508101000951'.
To Next Page
Loading...
Need help?
General
