A-6 Magellan
®
8100/8100Ω and 8200/8200Ω Scanner
Calibration Switch Seal
This seal allows you to secure the Calibration Switch and restrict access to
it. If the calibration seal is broken or missing, you may be prohibited from
operating the scale without recertification. Check local and state require-
ments for specific restrictions.
LEGAL NOTE
There are regulations that must be followed in order to ensure compli-
ance when operating a weighing device such as the scanner/scale. Fail-
ure to observe and comply with these regulations could result in legal
action.
To Next Page
Loading...
Need help?
General
