Datalogic Quickscan QD2200

UPC/EAN GLOBAL SETTINGS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 81
Optional Add-On Timer
This option sets the time the scanner will look for an add-on when an add-on fragment
has been seen and optional add-ons are enabled.
$CADOT01
Optional Add-on Timer = 10ms
Optional Add-on Timer = 20ms
$CADOT02
$CADOT03
Optional Add-on Timer = 30ms
Optional Add-on Timer = 50ms
$CADOT05
$CADOT07

Optional Add-on Timer = 70ms
Optional Add-on Timer = 100ms
$CADOT0A
$CADOT10
Optional Add-on Timer = 160ms