GLOBAL INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
16
GLOBAL INTERFACE FEATURES
The following interface features are configurable by all interface types.
To set features specific to your interface, turn to that section of this manual.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set
to ignore, the reader will ignore all host commands except those necessary for:
• service mode
• flash programming mode
• keeping the interface active
• transmission of labels.
$CIFIH00
Host Commands = Obey
(Do Not Ignore Host Commands)
Host Commands = Ignore
$CIFIH01
To Next Page
Loading...
