Datalogic Quickscan QD2200

ENTER/EXIT PROGRAMMING MODE SYMBOLOGIES
112 QUICKSCAN™ I QD2200
DATALOGIC 2 OF 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the scanner will not read Datalogic 2 of 5 bar codes.
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Datalogic 2 of 5
check character.
$CD2EN00

Datalogic 2 of 5 = Disable
Datalogic 2 of 5 = Enable
$CD2EN01
$CD2CC00

Datalogic 2 of 5 Check Character Calculation
= Disable
Datalogic 2 of 5 Check Character Calculation = Enable
$CD2CC01