BEEP ON ASCII BEL ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
3
Beep On ASCII BEL
When this parameter is enabled, the scanner issues a beep when a <BEL> character is
detected on the serial line. <BEL> is issued to gain a user's attention to an illegal entry or
other important event.
Beep On Not on File
This option enables/disables the action of the scanner to sound a three beep sequence
upon receiving a Not-On-File (NOF) host command.
Beep On ASCII BEL = Disable
$CR2BB00
$CR2BB01
Beep On ASCII BEL = Enable
Beep On Not On File = Disable
$CBPNF00
$CBPNF01
Beep On Not On File = Enable
To Next Page
Loading...
