GS1-128 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
101
GS1-128
The following options apply to the GS1-128 symbology. (Also known as USS-128, GTIN-
128, UCC-128.)
GS1-128 Enable
This option enables/disables the ability of the scanner to translate GS1-128 labels to the
GS1-128 data format. Options are:
• Transmit GS1-128 labels in Code 128 data format.
• Transmit GS1-128 labels in GS1-128 data format.
• Do not transmit GS1-128 labels.
INTERLEAVED 2 OF 5 (I 2 OF 5)
The following options apply to the I 2 of 5 symbology.
$CU8EN00
GS1-128 = Transmit in Code 128 data format
GS1-128 = Transmit in GS1-128 data format
$CU8EN01
$CU8EN02
GS1-128 = Do not transmit GS1-128 labels
CAUTION: When reading this symbology, the settings for I 2 of 5 Length
Control AND I 2 of 5 Check Character Calculation MUST be enabled to
increase decoding safety.
To Next Page
Loading...
Need help?
General
