PRODUCT REFERENCE GUIDE
179
APPENDIX B
STANDARD DEFAULTS
The most common configuration settings are listed in the “Default” column of the table
below. Page references are also provided for feature descriptions and programming bar
codes for each parameter. A column has also been provided for recording of your pre-
ferred default settings for these same configurable features.
Table 23 Standard Defaults
PARAMETERS DEFAULT
YOUR SETTING PAGE NUMBER
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore Obey 16
USB Suspend Mode Enable 17
USB-COM
Intercharacter Delay No Delay 2
Beep On ASCII BEL Disable 3
Beep On Not on File Enable 3
ACK NAK Options Disable 4
ACK Character ‘ACK’ 5
NAK Character ‘NAK’ 5
ACK NAK Timeout Value 200 ms 6
ACK NAK Retry Count 3 Retries 5
ACK NAK Error Handling Ignore Errors Detected 7
Indicate Transmission Failure Enable 7
Disable Character ‘D’ 8
Enable Character ‘E’ 8
USB OEM
USB-OEM Device Usage Handheld 37
To Next Page
Loading...
