To Next Page

To Previous Page

Service Procedures Digital DECpc LPx/LPx+

56 MCS Logistics Engineering - Nijmegen

Removing the Fan /Speaker Assembly

To remove the Fan /Speaker Assembly:

1) Turn off the computer.

2) Disconnect external devices, ac power, and monitor power.

3) Unlock and remove outside cover.

4) Remove fan and speaker connections from main logic board.

5) Press down on the two retaining clips.

6) Tilt assembly away from front panel and lift out.

Figure 3 - 17 Removing the Fan /Speaker Assembly

Questions and Answers:

Need help?

Do you have a question about the DEC DECpc LPx and is the answer not in the manual?

DEC DECpc LPx Specifications

General