DEC DECpc LPx User Manual

Troubleshooting Digital DECpc LPx/LPx+
80 MCS Logistics Engineering - Nijmegen
Monitor Troubleshooting
Problem
Possible Cause
Action
Monitor power
indicator is not
on
Monitor is turned off.
Power indicator is defective.
Turn on the monitor.
Replace the failed component.
No screen
display
Configuration error.
Monitor brightness and contrast
controls are incorrectly set.
Run the BIOS SETUP UTILITY to configure the
computer for VGA operation.
Set the jumper for VGA operation. Refer to
“Main Logic Board Jumpers”.
Adjust the monitor brightness and contrast
controls.
No monitor
display while
loading
Windows video
drivers
Monitor type incorrectly set. Set the correct monitor type. Refer to appropriate
video driver documentation.
Distorted-
rolling-or
flickering
screen display-
or wrong/
uneven color
Monitor incorrectly adjusted.
Monitor signal cable incorrectly
installed.
Adjust accordingly.
Straighten any bent connector pins and then
reconnect.
Color monitor
displaying
monochrome
Computer was turned on before
the monitor was turned on.
Video jumper incorrectly set.
Turn off the computer, turn on the monitor, then
turn the computer back on.
Set the jumper for VGA operation.
Monitor fails to
switch to high-
resolution mode
Appropriate high-resolution
video drivers are not installed or
incorrectly installed.
Correctly install all appropriate high-resolution
video drivers. Refer to the documentation supplied
with the monitor and/or video drivers.
Monitor display
not centered
while loading
Windows video
drivers
Monitor type incorrectly set. Set the correct monitor type.
Refer to appropriate video driver documentation.

DEC DECpc LPx Specifications

General

Brand	DEC
Model	DECpc LPx
Category	Desktop
Language	English