Update of version number to v2.08
Various typographical changes and formatting corrections
Corrections to OTP memory map to be consistent with APS012
Description of FINFO reg updated to indicate that RNG bit is bit 15 and not bit 10
TXFEN and PLLFEN descriptions updated
Modification to FS_PLLTUNE value for channel 3
Update to OP_SEL description. Update to clock offset descriptions in Table 46
Description of ATXSLP updated to include reference to SLEEP_EN (0x2c:06)
Added note to PMSC_TXFSEQ re use with external PA
Figure 33 replaced for readability
Revision v2.09
Update of version number to v2.09
Various typographical changes and formatting corrections
Update to description of INIT state
Correction to receiver errors for which a receiver reset is required
Addition of actions required to correctly read a frame received during low power listening
Correction to operation of SNOZ_TIM
Inclusion of section on SFD initialization in automatic acknowledgement
Further details on the operation of the AAT bit
Update to OTP memory map to ensure consistency with application note APS012
Inclusion of additional information on RCPHASE
Correction of reference to Figure 26
Change to text of warning on not using SFD timeout
Modification to the operation of DRX_PRETOC
Correction to operation of SNOZ_TIM
Modification of definition of BLNKEN
Addition of clarification on operation of DWSFD / TNSSSFD / RNSSFD
To Next Page