Receive Message Time of Arrival
Transmit Message Time of Sending
16-bit Delay from Transmit to Antenna
Acknowledgement Time and Response Time
Pulsed Preamble Reception Configuration
User-specified short/long TX/RX SFD sequences
Automatic Gain Control configuration
External synchronisation control.
Read access to accumulator data
Peripheral register bus 1 access – GPIO control
Digital Receiver configuration
Transmitter calibration block
Frequency synthesiser control block
One Time Programmable Memory Interface
Leading edge detection control block
Digital Diagnostics Interface
Power Management System Control Block
Note the “Type” mnemonic in the table above has the following meaning:
• RO – Read Only,
• WO – Write Only,
• RW – Read and Write,
• SRW – Special type of Read and Write, refer to individual register description for details,
• ROD – Read Only part of RX Double buffered swinging set of RX frame related information,
• RWD – Read and Write part of RX Double buffered swinging set of RX frame related information.
To Next Page
Loading...