DEEP SEA ELECTRONICS DSEGenset DSE3110 - ADJUSTABLE PARAMETERS IN CONFIGURATION EDITOR; MODULE SETTINGS; CAN SETTINGS

Front Panel Configuration
057-086 ISSUE: 6
Page 44 of 56
6.2 ADJUSTABLE PARAMETERS IN CONFIGURATION EDITOR
6.2.1 MODULE SETTINGS
MPU/Hz
3110-xxx-01 (MPU/Hz) option only
CAN
3110-xxx-02 (CAN) option only
Configuration Parameters – Module (Page 1)
101
Contrast
000 %
102
RESERVED
103
RESERVED
104
Lamp Test at Start-up
On (1), Off (0)
105
Power Save Mode Enable
On (1), Off (0)
106
Protected Start Enabled
On (1), Off (0)
107
Power Up in Auto Mode
On (1), Off (0)
108
Oil Pressure Display
PSI (1), Bar (0)
CAN
109
Display Volts in Ph-Ph
On (1), Off (0)
110
Temperature Display
ºF (1), ºC (0)
CAN
6.2.2 CAN SETTINGS
MPU/Hz
3110-xxx-01 (MPU/Hz) option only
CAN
3110-xxx-02 (CAN) option only
Configuration Parameters – Application (Page 2)
201
Default Configuration
On (1), Off (0)
CAN
202
Alternative Engine Speed
On (1), Off (0)
CAN
203
CAN ECU Data Fail Arming
0 (Arming)
CAN
204
CAN ECU Data Fail Action
0 (Action)
CAN
205
CAN ECU Data Fail Delay
0 s
CAN