1 INTRODUCTION
This document details the installation and operation requirements of the DSE3110 module.
The manual forms part of the product and must be kept for the entire life of the product. If the product
is passed or supplied to another party, ensure that this document is passed to them for reference
purposes.
This is not a controlled document. Updates are not automatically informed. Any future updates of this
document are included on the DSE website at www.deepseaelectronics.com
The DSE3xxx series is designed to provide differing levels of functionality across a common platform.
This allows the generator OEM greater flexibility in the choice of controller to use for a specific
application.
The DSE3110 module has been designed to allow the operator to start and stop the generator, and if
required, transfer the load to the generator either manually or automatically.
The powerful ARM microprocessor contained within the module allows for incorporation of a range of
complex features:
• Icon based LCD display
• True RMS Voltage monitoring
• USB Communications
• Engine parameter monitoring.
• Fully configurable inputs for use as alarms or a range of different functions.
• Engine ECU interface to electronic engines (specify on ordering)
• Magnetic pickup interface for engine only applications (specify on ordering)
Using a PC and the DSE Configuration Suite software allows alteration of selected operational
sequences, timers, alarms and operational sequences. Additionally, the module’s integral front panel
configuration editor allows adjustment of this information.
A robust plastic case designed for front panel mounting houses the module. Connections are via
locking plug and sockets.
Access to critical operational sequences and timers for use by qualified engineers can be changed
from the module’s front panel.
The module is housed in a robust plastic case suitable for panel mounting. Connections to the module
are via locking plug and sockets.
To Next Page
Loading...
Need help?
General
