DEEP SEA ELECTRONICS DSEGenset DSE3110 User Manual

Front Panel Configuration
Page 47 of 56
057-086 ISSUE: 6
6.2.7 ENGINE SETTINGS
MPU/Hz
3110-xxx-01 (MPU/Hz) option only
CAN
3110-xxx-02 (CAN) option only
Configuration Parameters – Engine (Page 7)
701
Magnetic Pickup Fitted
On (1), Off (0)
MPU/Hz
702
Flywheel Teeth
000
MPU/Hz
703
Start Attempts
0
704
RESERVED
705
RESERVED
MPU/Hz
706
Gas Choke Timer (Gas Engine Only)
0:00
MPU/Hz
707
Gas On Delay (Gas Engine Only)
0:00
MPU/Hz
708
Gas Ignition Off Delay (Gas Engine Only)
0:00
709
Crank Disconnect on Oil Enable
On (1), Off (0)
710
Check Oil Pressure Prior to Starting
On (1), Off (0)
711
Crank Disconnect on Oil Threshold
0.00 Bar
CAN
712
Crank Disconnect on Frequency
0.0 Hz
713
Crank Disconnect on Engine Speed
000 rpm
714
Under Speed Enable
On (1), Off (0)
715
Under Speed Trip
0000 rpm
716
Over Speed Trip
0000 rpm
717
RESERVED
718
RESERVED
719
RESERVED
720
RESERVED
721
RESERVED
722
RESERVED
723
RESERVED
724
RESERVED
725
Charge Alt Failure Enable
On (1), Off (0)
726
Charge Alt Failure Trip
0.0 V
6.2.8 ALTERNATE CONFIGURATION SETINGS
Configuration Parameters – Alternate Configuration (Page 8)
801
Enable Configuration
On (1), Off (0)
802
Alternative Engine Speed
On (1), Off (0)
803
Ender Voltage Shutdown Enable
On (1), Off (0)
804
Under Voltage Trip
On (1), Off (0)
805
Under Voltage Trip Level
0 V
806
Loading Voltage
0 V
807
Over Voltage Trip Level
0 V
808
Under Frequency Enabled
On (1), Off (0)
809
Under Frequency Trip level
0.0 Hz
810
Loading Frequency
0.0 Hz
811
Nominal Frequency
0.0 Hz
812
Over Frequency Enabled
On (1), Off (0)
813
Over Frequency Trip Level
0.0 Hz
814
Alternative Under Speed Enable
On (1), Off (0)
815
Alternative Under Speed Trip
0000 rpm
816
Alternative Over Speed Trip
0000 rpm

DEEP SEA ELECTRONICS DSEGenset DSE3110 Specifications

General

Brand	DEEP SEA ELECTRONICS
Model	DSEGenset DSE3110
Category	Control Unit
Language	English