DEEP SEA ELECTRONICS DSEGenset DSE3110 - MAINTENANCE, SPARES, REPAIR AND SERVICING

Maintenance, Spares, Repair And Servicing
057-086 ISSUE: 6
Page 54 of 56
9 MAINTENANCE, SPARES, REPAIR AND SERVICING
The controller is Fit and Forget. As such, there are no user serviceable parts within the controller.
In the case of malfunction, contact the original equipment manufacturer (OEM).
9.1 PURCHASING ADDITIONAL CONNECTOR PLUGS FROM DSE
If additional plugs are required from DSE, contact our Sales department using the part numbers
below.
9.1.1 PACK OF PLUGS
Module Type
Plug Pack Part Number
DSE3110
007-515
9.1.2 INDIVIDUAL PLUGS
Module Terminal Number
Plug Description
Part No.
1 to 7
7 way 5.08 mm
007-447
8 to 9
2 way 7.62 mm
007-448
10 to 17
8 way 5.08 mm
007-164
PC Configuration interface lead
(USB type A – USB type B)
016-125
9.2 PURCHASING ADDITIONAL FIXING CLIPS FROM DSE
Item
Description
Part No.
Module Fixing Clips (Packet Of 2)
020-406
9.3 PURCHASING OPTIONAL SEALING GASKET FROM DSE
Item
Description
Part No.
Module Silicon Sealing Gasket
020-385