Figure 70. Closing the processor socket frame
4 Secure the processor socket cover to the processor socket base by tightening the screws in the sequence 1, 2, and 3. When all three
scr
ews are fully threaded, the socket is then actuated. The three screws are tightened to a torque value of 16.1 ± 1.2 kgf-cm (14.0 ± 1.0
lbf-in).
NOTE: Press the force plate while tightening the screws to avoid tilting of the processor cover out of the processor socket.
Installing and removing system components 115
To Next Page
Loading...
