Dell EMC PowerEdge R7425 - Right Control Panel View

Table 5. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
O (
default state) Indicates that the iDRAC Quick Sync 2
feature is turned o. Press the iDRAC Quick
Sync 2 button to turn on the iDRAC Quick
Sync 2 feature.
If the LED fails to turn on, reseat the left control panel
ex cable and check again.
If the problem persists, see the
Getting help section.
Solid white Indicates that iDRAC Quick Sync 2 is ready
t
o communicate. Press the iDRAC Quick
Sync 2 button to turn o.
If the LED fails to turn o, restart the system.
If the problem persists, see the
Getting help
section.
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink inde
nitely, see the
Getting help section.
Blinks white slowly Indicates that rm
ware update is in
progress.
If the indicator continues to blink indenitely, see the
Getting help section.
Blinks white v
e times rapidly and
then turns o
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is congured to
be disabled by iDRAC.
If the problem persists, see the
Getting help section.
For more information, see
Integrated Dell Remote
Access Controller User's Guide at Dell.com/
idracmanuals or Dell OpenManage Server
Administrator User’s Guide at Dell.com/
openmanagemanuals.
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system.
If the problem persists, see the
Getting help section.
Blinking amber Indicates that the iDRAC Quick Sync 2
har
dware is not responding properly.
Restart the system.
If the problem persists, see the
Getting help section.
Right control panel view
Figure 9. Right control panel view
14 PowerEdge R7425 system overview