Dell EMC PowerEdge R7425 - Installing the Front Bezel

Figure 20. Removing the front bezel
Next step
Install the front bezel
.
Installing the front bezel
The procedure to install the front bezel with the LCD panel and the front bezel without the LCD panel is the same.
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is part of the LCD bezel package.
2 Align and insert the right end of the bezel onto the system.
3 Push the bezel on the system until it clicks into place.
4 Lock the bezel by using the key.
64 Installing and removing system components