Dell EMC PowerEdge R7425 - System Setup Details; System BIOS

System Setup details
The
System Setup Main Menu screen details are explained as follows:
Option Description
System BIOS Enables you to con
gure BIOS settings.
iDRAC Settings Enables you to con
gure the iDRAC settings.
The iDRAC settings utility is an interface to set up and congure the iDRAC parameters by using UEFI (Unied
Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using the iDRAC settings
utility. For more information about this utility, see Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals.
Device Settings Enables you to con
gure device settings.
Service Tag
Se
ttings
Enables you to con
gure service tag settings.
System BIOS
You can use the
System BIOS screen to edit specic functions such as boot order, system password, setup password, set the SATA and
PCIe NVMe, and enable or disable USB ports.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
The System BIOS Settings screen details are explained as follows:
Option Description
System Information Species information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Species information and options related to the installed memory.
Processor Settings Species information and options related to the processor such as speed and cache size.
SATA Settings Species options to enable or disable the integrated SATA controller and ports.
NVMe Settings Species options to change the NVMe settings.
Boot Settings Species options to specify the UEFI mode.
42 Pre-operating system management applications