Dell EMC PowerEdge R7425 - Installing the Cooling Fan Assembly

Figure 30. Removing the cooling fan assembly
Next step
Install the cooling fan assembly
.
Installing the cooling fan assembly
Prerequisite
Follow the safety guidelines listed in Safety instructions
.
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable latch before installing the
cooling f
an assembly. Incorrectly installed cables may get damaged.
Steps
1 Align the guide rails on the cooling fan assembly with the st
andos on the system.
2 Lower the cooling fan assembly into the system until the cooling fan connectors engage with the connectors on the system board.
3 Lower the release levers to lock the cooling fan assembly into the system.
74 Installing and removing system components