Dell Embedded Box PC 5000 - Removing the Hard-Drive Cage

Removing the hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC.
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC. For more safety best practices,
see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care
when handling the Solid-state/hard drive.
CAUTION: To avoid data loss, do not remove the hard drive/solid-state
drive while the Embedded Box PC is in sleep or on state.
Prerequisites
Follow step 1 to step 6 in “Removing the back cover”.
Procedure
1 Remove the screws that secure the hard-drive cage to the back cover.
22