Dell Embedded Box PC 5000 - Replacing the Hard-Drive Cage

Replacing the hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC.
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC. For more safety best practices,
see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care
when handling the Solid-state/hard drive.
Procedure
1 Align the screw holes on the hard-drive cage with the screw holes on the
back cover.
2 Replace the screws that secure the hard-drive cage to the back cover.
Post-requisites
Follow step 2 to step 8 in “Replacing the back cover”.
24