Dell Embedded Box PC 5000 - Removing the WLAN-Antenna Connectors; Prerequisites; Procedure

Removing the WLAN-antenna
connectors
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC.
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC. For more safety best practices,
see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Follow step 1 to step 6 in “Removing the back cover”.
2 Remove the PCI/PCIe card (if installed).
Procedure
1 Remove the nuts and washers that secure the WLAN-antenna connectors
one and two to the chassis.
52