Dell Embedded Box PC 5000 - Removing the Back Cover

Removing the back cover
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC.
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC. For more safety best practices,
see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Remove the screws that secure the back cover to the chassis.
1 M3x5 countersunk
screws(5)
2 M3x8 screws (4) and
rubber feet (4)
3 back cover 4 chassis
18