200
www.dell.com | support.dell.com
Ensure that the tab on the processor cover is positioned underneath the center cover latch on the
socket.
8 Pivot the socket release lever back toward the socket and snap it into place to secure the
processor.
NOTICE: If you are not installing a processor upgrade kit from Dell, reuse the original heat sink
assembly when you replace the processor.
If you installed a processor replacement kit from Dell, return the original heat sink assembly and
processor to Dell in the same package in which your replacement kit was sent.
9 Install the heat sink assembly:
a Place the heat sink assembly back onto the heat-sink assembly bracket.
b Rotate the heat sink assembly down towards the computer base and tighten the two
captive screws.
NOTICE: Ensure that the heat sink is correctly seated and secure.
10
Replace the computer cover.
1 heat sink assembly
2 heat-sink assembly bracket
3 captive screw in housing (2)
3
1
2
To Next Page
Loading...
