RACADM Subcommand Overview 341
Synopsis
racadm getssninfo [-A] [-u <
username
> | *]
Description
The getssninfo command returns a list of users that are connected to
iDRAC6. The summary information provides the following information:
• Username
• IP address (if applicable)
• Session type (for example, SSH or Telnet)
• Consoles in use (for example, Virtual Media or Virtual KVM)
Supported Interfaces
• Local RACADM (returns only IPv4 information)
• Remote RACADM
• telnet/ssh RACADM
Input
Table A-6 describes the getssninfo subcommand options.
Examples
• racadm getssninfo
Table A-7 provides an example of output from the racadm getssninfo
command.
Table A-6. getssninfo Subcommand Options
Option Description
-A The -A option eliminates the printing of data headers.
-u The -u <username> user name option limits the printed output to only the
detail session records for the given user name. If an asterisk (*) symbol is
given as the user name, all users are listed. Summary information is not
printed when this option is specified.
To Next Page
Loading...
